New SEPCO SolarSlide Lighting “Slides” into Outdoor Energy Savings

SEPCO SolarSlide outdoor lighting are high-powered LED contemporary/transitional design solar lighting systems for outdoor area and site luminaires. There are multiple LED lamp options, interchangeable shades, domes, and poles. Custom solar-power designs and surface-mount choices are available.

SEPCO, founded 1994, is a U.S. entrepreneurial family-owned manufacturer of solar lighting systems and off grid solar power systems for use where grid power is prohibitive or areas looking for a “green alternative” to traditional lighting and power is sought.

SolarSlide LED is 100 percent solar powered continually; 100 percent off the grid; self-storing and self-recharging. Each SolarSlide system is comprised of a solar-power assembly, fixture, bracket and all mounting hardware ready to attach to a SEPCO or other pole.

SEPCO state-of-the-art SolarSlide produces high-performance white light, with low-glare beam projections and aiming capability on various models. Its LED outdoor lighting system provides powerful, ultra long lasting, low-maintenance illumination for commercial, institutional, industrial and municipal areas; walkways and pathways, parking lots, parks, streetscapes and roadways.

SolarSlide is a contemporary / transitional design. It comprises a complete unit with LEDs and a solid-state driver that operates each fixture from an integral solar charged battery system. Fixture wattages range from 15 to 60 watts and can be specified with IES Type II, Ill and V full cutoff light distribution patterns, for task-specific lighting. For ocean shore areas, SEPCO endangered sea-turtle lighting is also available.

SolarSlide solar power assemblies range from 10 to 425 watts, with battery sizes providing a minimum of five-days autonomy. Compact solar panel assemblies for SolarSlide are selected and programed by company’s in-house solar lighting engineers for recharging the concealed storage battery assemblies. Units provide custom illumination for specific locations and uses.

SolarSlide light pole options are available in accordance with power assembly size, local wind load requirements, and with direct in-ground burial, anchor and transformer base options. Poles available in aluminum, composite fiberglass or galvanized steel, with heights from 10 to 35 feet. SolarSlide can mount directly to decorative post top poles, with a separately mounted solar battery, or with the solar panel mounted lower on the pole.

SolarSlide decorative fixture shade housings are offered in three designs, each 25.5-inches round by 24.25-inches high. All system components are made from rugged low-copper marine-grade cast aluminum for longevity. Each LED in the light source has an individual optical lens. Fixtures meet high IP66 ingress protection standards; are UL, cUL listed. The complete system is made in America at SEPCO’s modern plant in Florida. LEDs have greater than 70% retained lumens after 50,000 hours. LED Driver life is 100,000 hours at 25 degrees C.

Polyester powder-coated finishes for luminaires, solar power assemblies, poles and other exposed components may be specified in Black, Bronze, Gray, Green, Metallic Bronze, Metallic Titanium, or White standard; custom colors are available.