ETL Listed Modular LED Street Lights Provide High-Lumen Lighting w/Energy Savings

LEDtronics introduces a series of dimmable modular LED streetlights that are ETL listed and RoHS compliant. The new Series SLM00 Modular LED streetlight fixtures are dimmable from 15 percent to 100 percent of maximum brightness, support input voltages from 120 to 277 VAC, and conform to IESNA Type III pattern, providing full cutoff.

The modular streetlights are available in 5000 Kelvin pure white LED light color. White LED boasts a lifespan of over 50,000 hours and lumen maintenance of over 70 percent. That makes them excellent replacements for street and highway lighting, parking lots, driveway and walkway lighting. In addition, these units may also be used for area flood lighting, parks/playgrounds, billboard lighting, construction-site lighting, and tennis court/stadium lighting.

The modular LED streetlights also eliminate the unwanted glare, light trespass, energy waste and sky glow that accompany traditional incandescent street lamps. An estimated 30 percent of outdoor light generated in the U.S. goes into space, flooding the skies and creating electric haze that reduces stargazing. LED streetlights shine light in the direction where it is needed – at ground level, reducing the amount of light that is lost to the sky and improving overall nighttime viewing. The LEDtronics modular SLM00 series meet IES street lighting standards. (NOTE: Test results may be downloaded from the company’s Web site: www.LEDtronics.com)

The modular LED streetlight fixtures offer energy savings up to 75 percent and are available in the following wattage configurations: 65 watts can replace up to 150-watt MH / HPS lighting; 95W can replace up to 200W; 125W can replace up to 320W; 155W can replace up to 400W; 190W can exceed 400W replacement; 220W can exceed 400W replacement; 250W can exceed 400W replacement; 280W can exceed 400 watt replacement; and 310W can replace up to 1000W.

Lumen output ranges from 5,076 to 25,500 lm, depending on wattage configuration.

Solid-state design renders LEDs impervious to electrical and mechanical shock, vibration, frequent switching and environmental extremes. With an average life span of 50,000-plus hours, white LEDs operate reliably year after year and are virtually maintenance free.

For additional information, visit http://tinyurl.com/mrlobcv.


InfoDirectWebBanner

CURRENT ISSUE

2014 Summer/Fall Buyer's Guide

POLL QUESTION

Which market would you MOST like to expand into?

Loading...